Project Swimming-pool in Busto Arsizio, Busto Arsizio

Swimming-pool in Busto Arsizio

Busto Arsizio, Italy

Ref #: 3630

Category: SPORT FACILITIES

Construction


Yard	Swimming-pool realization
Location	Busto Arsizio, Italy
Subcategory	SWIMMING POOL
Built in	2005
Opened in	2005
Application	Swimming-pool realization
Application Type	Floor/wall coverings
Contractor company	Teilos Milano (Arch. Bearzatto Rosella)
Installer companies	Paviteam Vicenza
MAPEI Distributor	Comated - Cusano Milanino
Project Manager	Ing. Fabio Fabiano

Product used for the project

ADESILEX P4

High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material. N.B. May also be used for smoothing internal and external surfaces. TECHNICAL DATA:…

High-performance, self-buttering, quick-setting grey cementitious adhesive for…

ADESILEX PG1/PG2

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

FUGOLASTIC

Liquid polymeric additive for enhancing the performance of KERACOLOR FF & KERACOLOR GG. Used as a substitute for water to mix KERACOLOR FF or KERACOLOR GG to improve the grout compactness,…

Liquid polymeric additive for enhancing the performance of KERACOLOR FF &…

GRANIRAPID

Two-component high performance flexible rapid set adhesive for the installation of ceramic, porcelain, natural and agglomerate stone. Ideal for heavy duty commercial and industrial applications,…

Two-component high performance flexible rapid set adhesive for the installation…

KERACOLOR GG

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide.

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement joints (expansion, separation, control, etc.).…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

This product replaces MAPEGROUT TISSOTROPICO

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

NIVOPLAN

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

TOPCEM

Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be…

Special fast drying hydraulic binder for producing bonded, unbonded or floating…