Project Sándor- Metternich Castle, Bajna


Yard	Facade maintenance for outbuildings with POROMAP SYSTEM on 1500 square meters, waterproofing.
Location	Bajna, Hungary
Subcategory	CASTLE
Application	Facade maintenance, waterproofng.
Start and finish date	2018/2021
Application Type	Concrete restoration systems, Masonry restoration, Waterproofing systems
Contractor company	Pharos ’95 Kft.
Installer companies	Pharos ’95 Kft.
Architects	Zoltán Erő, Palatinum Stúdió
MAPEI Distributor	Mapei Kft., Budaörs
Credits	Mário Bere
MAPEI Coordination	Zsolt Lakatos

ADESILEX PG1/PG2

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

KERALASTIC T

White thixotropic version of KERALASTIC, particularly suitable for vertical applications. COVERAGE: approx. 2.5-5 kg/m2.

White thixotropic version of KERALASTIC, particularly suitable for vertical…

MAPEBAND EASY

TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315 %.…

TECHNICALDATA: Type of material: rubber sandwiched between two layers of…

MAPECOAT I 600W

Two-component, opaque, epoxy resin based finish specially formulated to form a shiny, protective anti-dust and anti-oil film, which is applied directly onto concrete or cementitious systems such as…

Two-component, opaque, epoxy resin based finish specially formulated to form a…

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement joints (expansion, separation, control, etc.).…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPEWRAP 21

Superfluid epoxy resin for impregnation with Mapewrap “wet system”. Mapewrap 21 is a two-component superfluid solvent free product based on epoxy resins, especially formulated for the impregnation,…

Superfluid epoxy resin for impregnation with Mapewrap “wet system”. Mapewrap 21…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”. Mapewrap 31 is a two-component solvent free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”.…

MAPEWRAP C FIOCCO

High-strength carbon fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: high-strength carbon.…

High-strength carbon fibre cord to be impregnated with MAPEWRAP 21…

MAPEWRAP PRIMER 1

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

POLYPRIMER

Bituminous primer made with blown bitumen and hi-tech solvents. POLYPRIMER is used as a primer for concrete surfaces, to stop dusting and saturate their porosity, allowing traditional or…

Bituminous primer made with blown bitumen and hi-tech solvents. POLYPRIMER is…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…