Project Sandro Pertini Theatre Bresso, Bresso


Yard	theatre, waterproof
Location	Bresso, Italy
Subcategory	THEATRE
Application	The use of our waterproofing materials, adhesives and protective coatings in the first building reconstruction in Italy with EU funds provided by the “Recovery and Resilience Facility” (RRF)
Start and finish date	2024
Application Type	Waterproofing systems
Contractor company	Multimanutenzione S.r.l.
Architects	Fortunato Businaro
MAPEI Coordination	Andrea Serafin, Davide Dido, Marco Cattuzzo, Fabio Bergamaschi

DURSILITE MATT

Washable water-based interior paint with good opacity. Ideal for extra matt finishings

Washable water-based interior paint with good opacity. Ideal for extra matt…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEFLEX PU 45 FT

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETHERM AR1 GG

ETA 10/0024 ETA 10/0025 TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of the mix (kg/m³): 1,400. Application temperature range: from +5°C to +35°C. Mixing ratio: 21-24% with…

ETA 10/0024 ETA 10/0025 TECHNICAL DATA: Consistency: powder. Colour: grey and…

PLANITOP SMOOTH & REPAIR ZERO

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

PURTOP ADY

Admixture for applying PURTOP EASY waterproofing membranes in just one single coat. TECHNICAL DATA: Consistency: liquid. Colour: brown. Mixing ratio A/B with Purtop Easy (by weight): 100 : 8.…

Admixture for applying PURTOP EASY waterproofing membranes in just one single…

PURTOP EASY

One-component, elastic polyurethane waterproofing membrane.

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water. Waiting time before applying other products:…

TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

TRIBLOCK P

Three component epoxy-cement based special primer. Can be used on absorbent and non-absorbent substrates. Can be used on damp substrates and those with high residual moisture. Apply two coats and…

Three component epoxy-cement based special primer. Can be used on absorbent and…