Project Route 2020, Dubai


Yard	Tunnels and stations
Location	Dubai, United Arab Emirates
Subcategory	TUNNEL
Application	Supply of products for underground construction and ceramic installation
Application Type	Products for underground construction (utt)

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

FUGOLASTIC

Liquid polymeric additive for enhancing the performance of KERACOLOR FF & KERACOLOR GG. Used as a substitute for water to mix KERACOLOR FF or KERACOLOR GG to improve the grout compactness,…

Liquid polymeric additive for enhancing the performance of KERACOLOR FF &…

GRANIRAPID

Two-component high performance flexible rapid set adhesive for the installation of ceramic, porcelain, natural and agglomerate stone. Ideal for heavy duty commercial and industrial applications,…

Two-component high performance flexible rapid set adhesive for the installation…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEQUICK CBS SYSTEM 1

Liquid retarding admixture with plasticizing effect for cementitious-based injection systems

Liquid retarding admixture with plasticizing effect for cementitious-based…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PLANITOP 100

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

TOPCEM

Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be…

Special fast drying hydraulic binder for producing bonded, unbonded or floating…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…