Project Renovation of non-swimmer outdoor pool at Heumatten, Windisch

Renovation of non-swimmer outdoor pool at Heumatten

Windisch, Switzerland

Ref #: 4656

Category: SPORT FACILITIES

Construction


Yard	non-swimmer pool
Location	Windisch, Switzerland
Subcategory	SWIMMING POOL
Application	Refurbishment of a non-swimmer's pool, which was previously covered with a foil. It is now covered with ceramic tiles. From project planning to execution, everything was accompanied by Mapei.
Start and finish date	2023
Application Type	Waterproofing systems
Installer companies	Shala Plattenbeläge GmbH, Gebenstorf
Architects	U.D.O. Architekten & Planer AG, Brugg
Specialists involved	Community of Windisch
MAPEI Coordination	Raffael Schöni

Product used for the project

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband TPE, PVC braces, Hypalon and for structural bonding. Adesilex PG4 is a two-component adhesive made up…

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

KERAPOXY EASY DESIGN

Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and…

Two-component, versatile, decorative, acid-resistant epoxy grout, with a…

MAPEBAND FLEX ROLL

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A hardness: approx. 80. Width: 300 mm (other sizes available upon…

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at…

MAPECOAT PU 20 N

Two-component coloured aliphatic polyurethane topcoat for membranes from the Purtop range

Two-component coloured aliphatic polyurethane topcoat for membranes from the…

MAPEGROUT 430 ZERO

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. May also be applied with continuous-feed rendering machine

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPELASTIC TURBO

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.

Two-component rapid-drying elastic cementitious mortar for waterproofing…

MAPENET 150

Blue in colour.

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…