Project detail

QBC 5 in Wien – ibis 3*** und Novotel 4****

Wien, Austria

Ref #: 1005

Category: TOURISM AND WELLNESS

Construction


Yard	640 Zimmer, mehrere Stiegenhäuser, Großküchen
Location	Wien, Austria
Subcategory	HOTEL/INN
Application	Fliesen- und Natursteinverlegung, Abdichtung + Zusatzleistungen
Application Type	Floor/wall coverings, Waterproofing systems
Client	ACCOR
Contractor company	Fliesen Wurm GmbH
Specialists involved	Herr Walzl
Credits	Bernd Hörbinger
MAPEI Coordination	Marco Müller
Other	Architekt: Strauss & Partner

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEBAND PE 120

TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide by 50 m long; – rolls 120 mm wide by 10 m long; – 90° and 270°…

TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature…

MAPEFLEX AC4

One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4 is used to seal internal and external expansion and construction joints subject to a medium amount of movement and…

One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4…

MAPEGROUT SV

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV with 12-13 parts of water. Pot life of mix: 15 minutes (at +20°C). Minimum applicable thickness: 1 cm.…

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…

MAPEGUM WPS

COVERAGE: approx. 1.5 kg/m2 per mm of thickness.

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…