Project Pirelli Skyscraper, Milano

Pirelli Skyscraper

Milano, Italy

Ref #: 3364

Category: COMMERCIAL FACILITIES

Construction


Yard	Regione Lombardia Building
Location	Milano, Italy
Subcategory	OFFICES
Built in	1956
Opened in	1960
Application	repairing the façade’s glass mosaic coverings, remaking the external avements laying the internal floors and consolidating the concrete structures
Start and finish date	2002/2005
Application Type	Concrete restoration systems
Client	Regione Lombardia
Contractor company	Grassi & Crespi Srl. e Marcora Srl; Eleca
Installer companies	Biesse, Milano; Liuni, Milano
Architects	Giò Ponti
MAPEI Distributor	Biesse, Liuni
Credits	Gianni Dal Magro, Massimiliano Nicastro - Mapei SpA
MAPEI Coordination	Andrea Aliverti,Tiziano Cerulli, Luigi Coppola, Fulvio Bianchi, Paolo Giglio, Massimiliano Nicastro e Matteo Venturini.

Product used for the project

ADESILEX PG1/PG2

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy based…

Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected…

EPOJET LV

Two component low viscosity epoxy resin for injection. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and structural strengthening of concrete and masonry…

Two component low viscosity epoxy resin for injection. Epojet LV is used to…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

EPORIP TURBO

Very fast hardening, two-component, polyester resin for sealing cracks in screeds. By adding dry sand it can be used to manufacture mortars for small repairs. Hardens in approximately 20 minutes.…

Very fast hardening, two-component, polyester resin for sealing cracks in…

GRANIRAPID

Two-component high performance flexible rapid set adhesive for the installation of ceramic, porcelain, natural and agglomerate stone. Ideal for heavy duty commercial and industrial applications,…

Two-component high performance flexible rapid set adhesive for the installation…

LATEX PLUS

TECHNICAL DATA OF LATEX PLUS + KERAQUICK S1: Pot life of mix: 45 minutes. Open time: 20 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA OF LATEX PLUS + KERAQUICK S1: Pot life of mix: 45 minutes. Open…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRABOND ECO FIX

Solvent-free, pressure sensitive, multi purpose adhesive, dispersed in water, with permanent tack and very low emissions of VOC. Used for both permanent and release bonding of a wide range of floor…

Solvent-free, pressure sensitive, multi purpose adhesive, dispersed in water,…