Project Iberostar Grand Packard, Havana


Yard	complete renovation
Location	Havana, Cuba
Subcategory	HOTEL/INN
Built in	1911
Opened in	1931
Application	supply of products for total hotel restoration and renovation
Start and finish date	2018
Application Type	Concrete restoration systems, Facade interventions, Masonry restoration, New building
Client	ALMEST CUBA
Contractor company	AEI-UCM-BBI (Associazione Economica Internazionale tra UCMBOUYGUES BATIMENT INTERNACIONAL)
Specialists involved	Impresa di Progetto e Investigazione della FAR (EMPI-FAR)
MAPEI Distributor	ARCA’99 / MAPEI
MAPEI Coordination	ARCA’99 / MAPEI

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband TPE, PVC braces, Hypalon and for structural bonding. Adesilex PG4 is a two-component adhesive made up…

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

KERALASTIC

High performance two-component polyurethane adhesive for the installation of ceramic, porcelain, natural and agglomerate stone tiles & mosaics on interior and exterior walls and floors. Improved…

High performance two-component polyurethane adhesive for the installation of…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing, expansion joints and over cracks subject to movement, must be applied by bonding with Adesilex PG4.

TPE tape for flexible sealing and waterproofing, expansion joints and over…

MAPECURE SRA

Curing admixture for cementitious mortar and concrete to reduce hydraulic shrinkage and the formation of micro-cracks. TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: – mortar:…

Curing admixture for cementitious mortar and concrete to reduce hydraulic…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for waterproofing damp areas such as bathrooms, showers, laundries, saunas, balconies and terraces before installing dressing…

MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESONIC CR

Soundproofing mat in sheets of rubber and cork applied on substrates before installing ceramic, stone, resilient and multi-layered wooden floors.

Soundproofing mat in sheets of rubber and cork applied on substrates before…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water. Waiting time before applying other products:…

TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO…

SILANCOLOR PITTURA PLUS

TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm ³ ): approx. 1.55. Dry solids content: (EN…

TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours…

SILANCOLOR TONACHINO PLUS

TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.90 (according to the grain size).…

TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the…