Project detail

MEIS | National Museum of Italian Judaism and the Shoah

Ferarra, Italy

Read our in-depth articles from Realtà Mapei International

Projects

Meis – National Museum of Italian Judaism and The Shoah

Inaugurated two years ago following the restoration of this former prison, the museum of Judaism is now eagerly awaiting the opening of the great Meis in 2020.

Find out more

Ref #: 5990

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	interior flooring
Location	Ferarra, Italy
Subcategory	MUSEUM
Built in	1912
Opened in	1913
Application	supply of resins for interior design flooring
Start and finish date	2011/2020
Application Type	Floor/wall coverings
Client	Mibac
Contractor company	Edil Frair Spa
Installer companies	Linoleum Lanza
Architects	D'Arco
MAPEI Distributor	Saces srl
Credits	Fabio Perillo
MAPEI Coordination	Fabio Perillo (Mapei Spa)

Product used for the project

LATEX PLUS

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…

MAPECOLOR PASTE

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…

MAPEFLOOR FINISH 58 W

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if…

MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…

Two-component, protective acrylic filming agent in water dispersion for…

MAPELUX LUCIDA

A high-strength, shiny metallic wax for use with the Mapefloor system, to protect floors subject to intense use. Mapelux Lucida is also used with Ultratop floors to facilitate easier maintenance of…

A high-strength, shiny metallic wax for use with the Mapefloor system, to…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PRIMER EP RUSTOP

Two-component epoxy primer for metal surfaces.

PRIMER LT

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use. TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Application: roller or brush. Consumption:…

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars.…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

QUARZO 0,25 - 0,5 - 0,9 - 1,2 - 1,9

Washed kiln-dried quartz sand for use with epoxy and polyurethane resin

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable fine-textured cementitious paste applied in layers up…