Project Light House, Praga

Light House

Praga, Czech Republic

Ref #: 3622

Category: COMMERCIAL FACILITIES

Construction


Yard	Floor/wall coverings
Location	Praga, Czech Republic
Subcategory	SHOPPING CENTER
Built in	2003
Opened in	2004
Application	Internal installation of ceramic tiles
Application Type	Floor/wall coverings
Contractor company	L.H. Vltava Waterfonf Touwe s.r.o.
Installer companies	Bau 24 s.r.o.
Architects	Ing. Arch. Hradecky
MAPEI Distributor	Mapei s.r.o.
Project Manager	ADMS Moches Zur

Product used for the project

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECEM

TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0 to 8 mm) and with 80-160 kg of water according to the moisture content of the inerts.…

TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of…

MAPEFLEX AC4

One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4 is used to seal internal and external expansion and construction joints subject to a medium amount of movement and…

One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLANITOP 100

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

TOPCEM

Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be…

Special fast drying hydraulic binder for producing bonded, unbonded or floating…