Project Corona Hotel, San Giovanni Rotondo


Yard	hotel restoration
Location	San Giovanni Rotondo, Italy
Subcategory	HOTEL/INN
Built in	2010
Opened in	2012
Application	global interior and exterior hotel restoration
Application Type	Facade interventions
Client	Co. Mant sas
Contractor company	La nUova Edilizia srl
Installer companies	La Nuova Edilizia srl
Specialists involved	ing. Pasquale Cafaro
MAPEI Distributor	Savino srl

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy based…

Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected…

Elastocolor Paint

Elastomeric paint for crack-bridging protection. Protective and decorative elastic paint based on acrylic resins in water dispersion. Elastocolor is used to protect the surfaces of concrete and…

Elastomeric paint for crack-bridging protection. Protective and decorative…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

FUGOLASTIC

Liquid polymeric additive for enhancing the performance of KERACOLOR FF & KERACOLOR GG. Used as a substitute for water to mix KERACOLOR FF or KERACOLOR GG to improve the grout compactness,…

Liquid polymeric additive for enhancing the performance of KERACOLOR FF &…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide.

Fine-grained, high-performance white cementitious mortar for grouting joints up…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECOAT I 600W

Two-component, opaque, epoxy resin based finish specially formulated to form a shiny, protective anti-dust and anti-oil film, which is applied directly onto concrete or cementitious systems such as…

Two-component, opaque, epoxy resin based finish specially formulated to form a…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Blue in colour.

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”. Mapewrap 31 is a two-component solvent free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with Mapewrap “dry system”.…

MAPEWRAP PRIMER 1

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the Mapewrap system. Mapewrap Primer 1 is a…

NIVOPLAN

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…

PLANICRETE

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLANITOP 200

TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Packaging: 25 kg bags.

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLANITOP SMOOTH & REPAIR ZERO

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic…

This product replaces PLANITOP RASA and RIPARA