Project Cipriani Condominium, Milano

Cipriani Condominium

Milano, Italy

Ref #: 5026

Category: RESIDENTIAL BUILDINGS

Construction


Yard	façades restoration
Location	Milano, Italy
Subcategory	CONDOMINIUM
Built in	2012
Opened in	2012
Application	façades restoration and painting
Application Type	Concrete restoration systems
Contractor company	I.C.R.E.
Credits	Gianni Dal Magro

Product used for the project

FUGOLASTIC

Liquid polymeric additive for enhancing the performance of KERACOLOR FF & KERACOLOR GG. Used as a substitute for water to mix KERACOLOR FF or KERACOLOR GG to improve the grout compactness,…

Liquid polymeric additive for enhancing the performance of KERACOLOR FF &…

KERACOLOR GG

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide.

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

This product replaces MAPEGROUT TISSOTROPICO

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETHERM AR1 GG

ETA 10/0024 ETA 10/0025 TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of the mix (kg/m³): 1,400. Application temperature range: from +5°C to +35°C. Mixing ratio: 21-24% with…

ETA 10/0024 ETA 10/0025 TECHNICAL DATA: Consistency: powder. Colour: grey and…

NIVOPLAN

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

QUARZOLITE PITTURA

Acrylic paint with micro-granular quartz with a smooth finish for long-lasting protection of internal and external surfaces.

Acrylic paint with micro-granular quartz with a smooth finish for long-lasting…

SILANCOLOR AC TONACHINO

Water-repellent, thick-layered acrylic-siloxane coating with high filling properties for internal and external surfaces. Available in the following granulometries: 1.2 mm. TECHNICAL DATA:…

Water-repellent, thick-layered acrylic-siloxane coating with high filling…

SILANCOLOR PRIMER

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%):…

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA:…