Project Centrum Babylon, Liberec


Yard	Swimming-pools covering
Location	Liberec, Czech Republic
Subcategory	MULTIFUNCTIONAL CENTER
Built in	1998
Opened in	2000
Application	New swimming-pools coverings
Application Type	Floor/wall coverings
Contractor company	Sdruzeni Havax sro - Liberec
Installer companies	Kodet sro - Kladno
Architects	Union Arch. Liberec; Sportprojecta sro - Brno; Sportakcent sro - Praga

ELASTOCOLOR PAINT

Elastomeric paint for crack-bridging protection. Protective and decorative elastic paint based on acrylic resins in water dispersion. Elastocolor is used to protect the surfaces of concrete and…

Elastomeric paint for crack-bridging protection. Protective and decorative…

FUGOLASTIC

Liquid polymeric additive for enhancing the performance of KERACOLOR FF & KERACOLOR GG. Used as a substitute for water to mix KERACOLOR FF or KERACOLOR GG to improve the grout compactness,…

Liquid polymeric additive for enhancing the performance of KERACOLOR FF &…

GRANIRAPID

Two-component high performance flexible rapid set adhesive for the installation of ceramic, porcelain, natural and agglomerate stone. Ideal for heavy duty commercial and industrial applications,…

Two-component high performance flexible rapid set adhesive for the installation…

IDROSILEX

Integral waterproofer for cementitious mortars. Use Idrosilex to obtain waterproof renders and screeds. Idrosilex is especially recommended for waterproofing basements, swimming-pools, reservoirs,…

Integral waterproofer for cementitious mortars. Use Idrosilex to obtain…

ISOLASTIC

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24-36…

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix:…

KERALASTIC

High performance two-component polyurethane adhesive for the installation of ceramic, porcelain, natural and agglomerate stone tiles & mosaics on interior and exterior walls and floors. Improved…

High performance two-component polyurethane adhesive for the installation of…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…

TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…

PLANICRETE

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLANITOP 100

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

WallGard Graffiti REMOVER GEL

Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.…

Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is…