Project Building of Olomuc county authority, Olomuc

Building of Olomuc county authority

Olomuc, Czech Republic

Ref #: 2980

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Coverings/restoration
Location	Olomuc, Czech Republic
Subcategory	PALACE
Built in	2000
Opened in	2001
Application	Installation of ceramic floor and reinforcement of concrete skeleton
Application Type	Floor/wall coverings
Client	State
Installer companies	Zlinstav Ostrava, a.s.
Architects	Ing. Arch. Tarkanyi
MAPEI Distributor	Mapei s.r.o. Olomuc
Project Manager	Stavoprojekt Olomuc a.s.

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

GRANIRAPID

Two-component high performance flexible rapid set adhesive for the installation of ceramic, porcelain, natural and agglomerate stone. Ideal for heavy duty commercial and industrial applications,…

Two-component high performance flexible rapid set adhesive for the installation…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

This product replaces MAPEGROUT TISSOTROPICO

Two-component, solvent-free primer for the internal bonding of levelling/smoothing compounds on nonabsorbent and difficult substrates. Epoxy resin based. Ideal for use on smooth impervious substrates…

Two-component, solvent-free primer for the internal bonding of…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLANITOP 100

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…

TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

TOPCEM

Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be…

Special fast drying hydraulic binder for producing bonded, unbonded or floating…