Project Belgrade's Archibishopric Palace, Belgrado

Belgrade's Archibishopric Palace

Belgrado, Czech Republic

Ref #: 4349

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Internal renovation
Location	Belgrado, Czech Republic
Subcategory	PALACE
Built in	2002
Opened in	2006
Application	Installation of ceramic, parquet and resin floor realization
Application Type	Installation of floors
Contractor company	Lesnina Inzjeniring doo
Project Manager	Milan Todorovic

Product used for the project

IDROSTOP MASTIC

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic…

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is…

ISOLASTIC

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24-36…

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix:…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECOLOR PASTE

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…

System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…