Project Baseny Mineralne, Solec Zdrój

Baseny Mineralne

Solec Zdrój, Poland

Ref #: 4501

Category: TOURISM AND WELLNESS

Construction


Yard	spa
Location	Solec Zdrój, Poland
Subcategory	SWIMMING POOL
Built in	2012
Opened in	2012
Application	waterproofing and ceramic installation
Application Type	Waterproofing systems
Installer companies	Fliz-Kom Mirosław Saczka
Project Manager	Piotr Kuglin, Mariusz Żmudka, Grzegorz Batko, Filip Stefański

Product used for the project

ADESILEX P10

Brilliant white mosaic adhesive with no vertical slip and extended open time. For interior and exterior wall and floor installations of ceramic, glass and marble mosaics. Mix with ISOLASTIC for…

Brilliant white mosaic adhesive with no vertical slip and extended open time.…

EPOJET

Superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and structural…

Superfluid epoxy resin for injection. Epojet is used for monolithic repair of…

ISOLASTIC

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24-36…

TECHNICAL DATA OF KERABOND/KERABOND T/KERABOND PLUS+ISOLASTIC: Pot life of mix:…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces.

MAPEFLEX PU 45 FT

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PULICOL 2000

Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It is easy to apply with a spatula or by brush and gives off very little odour. Pulicol 2000 has high detachment capacity on…

Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It…