Project Aquarena, Sollefteå


Yard	Aquarena
Location	Sollefteå, Sweden
Subcategory	SWIMMING POOL
Built in	2011
Opened in	2012
Application	Aquarena
Start and finish date	2011/2012
Application Type	Waterproofing systems
Client	Leisure Jones/ Stephen Jones
Contractor company	NCC AB
Installer companies	Knivsta Plattsättning AB
Architects	Bo Wallin
Specialists involved	Liljewalls Arkitekter
MAPEI Distributor	Modena
Project Manager	Stefan Lindström NCC / Göran Hällstål ANJO

ADESILEX P4

High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material. N.B. May also be used for smoothing internal and external surfaces. TECHNICAL DATA:…

High-performance, self-buttering, quick-setting grey cementitious adhesive for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEGUM WPS

COVERAGE: approx. 1.5 kg/m2 per mm of thickness.

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETEX SEL

Non-woven, macro-holed polypropylene fabric for reinforcing Mapei waterproof membranes eg Mapelastic Smart, Mapelastic Turbo. Improves punch resistance, elongation and crack-bridging.

Non-woven, macro-holed polypropylene fabric for reinforcing Mapei waterproof…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRALITE S1

Low dust, one-component, flexible lightweight S1 wall and floor tile adhesive. Non-slip with extended open time. Suitable for ceramic, porcelain and natural stone tiles and mosaics. Especially…

Low dust, one-component, flexible lightweight S1 wall and floor tile adhesive.…