Project Apartments in Viareggio, Viareggio


Yard	new realization
Location	Viareggio, Italy
Subcategory	APARTMENTS
Built in	2010
Opened in	2010
Application	apartments realization
Application Type	Facade interventions
Client	Costruzioni Edil-Ston
Contractor company	Costruzioni Edil-Ston
Installer companies	Costruzioni Edil-Ston
Architects	arch. Stefano Montemagni; geo. Marco Bertelli
MAPEI Distributor	Dini & Denna
Credits	Sergio Fortuna
Project Manager	ing. Angelo Puccinelli

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1/PG2

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

IDROSTOP MASTIC

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic…

Single-component adhesive for the installation of Idrostop. Idrostop Mastic is…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide.

Fine-grained, high-performance white cementitious mortar for grouting joints up…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing, expansion joints and over cracks subject to movement, must be applied by bonding with Adesilex PG4.

TPE tape for flexible sealing and waterproofing, expansion joints and over…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…

Two-component flexible cementitious mortar for waterproofing concrete and…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF SWELL

Single component hydro-expansive paste supplied in cartridges, used to waterproof and seal cracks in concrete. Where to use: Mapeproof Swell has been specially developed to form flexible, waterproof…

Single component hydro-expansive paste supplied in cartridges, used to…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESILENT ROLL

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…

MAPESILENT TAPE

Adhesive sealing tape made in closed-cell expanded polyethylene, ideal for sealing rolls and panels from the MAPESILENT range. It prevents the formation of acoustic bridges ensuring the seamlessness…

Adhesive sealing tape made in closed-cell expanded polyethylene, ideal for…

MAPETEX SEL

Non-woven, macro-holed polypropylene fabric for reinforcing Mapei waterproof membranes eg Mapelastic Smart, Mapelastic Turbo. Improves punch resistance, elongation and crack-bridging.

Non-woven, macro-holed polypropylene fabric for reinforcing Mapei waterproof…

MAPETHERM FIX 9

Polyprpoylene fastener. TECHNICAL DATA: Composition: polypropylene. Colour: grey. Sizes available mm: 83. Packaging: boxes of 500 pieces.

Polyprpoylene fastener. TECHNICAL DATA: Composition: polypropylene. Colour:…

MAPETHERM NET

TECHNICAL DATA: Composition: 100% glass fibre. Colour: white. Mesh size (mm): 4.15 x 3.8. Weight of primed mesh (g/m²): approx. 150. Storage: unlimited. Packaging: 50x1 m rolls.

TECHNICAL DATA: Composition: 100% glass fibre. Colour: white. Mesh size (mm):…

MAPETHERM PROFIL

Pre-mounted aluminium angle iron incorporated with alkali-resistant glass fibre mesh. TECHNICAL DATA: Composition: aluminium: Colour: grey. Dimensions m: 2.50. Packaging: boxes of 50 pieces.

Pre-mounted aluminium angle iron incorporated with alkali-resistant glass fibre…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…