Project Aniene swimming-pool, Rome

Aniene swimming-pool

Rome, Italy

Ref #: 4888

Category: SPORT FACILITIES

Construction


Yard	waterproofing
Location	Rome, Italy
Subcategory	SWIMMING POOL
Built in	2011
Opened in	2011
Application	swimming pool realization
Application Type	Waterproofing systems
Client	Circolo Canottieri Aniene
Contractor company	Costruzioni e Servizi Italia srl
Installer companies	LP Costruzioni
Architects	ing. Amodeo
MAPEI Distributor	Commerciale RAN srl
Credits	arch. Mario Monardo
Project Manager	arch. Luccardi

Product used for the project

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband TPE, PVC braces, Hypalon and for structural bonding. Adesilex PG4 is a two-component adhesive made up…

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing, expansion joints and over cracks subject to movement, must be applied by bonding with Adesilex PG4.

TPE tape for flexible sealing and waterproofing, expansion joints and over…

MAPELASTIC FOUNDATION

Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…

Two-component flexible cementitious mortar for waterproofing concrete and…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF SWELL

Single component hydro-expansive paste supplied in cartridges, used to waterproof and seal cracks in concrete. Where to use: Mapeproof Swell has been specially developed to form flexible, waterproof…

Single component hydro-expansive paste supplied in cartridges, used to…

MAPETEX SEL

Non-woven, macro-holed polypropylene fabric for reinforcing Mapei waterproof membranes eg Mapelastic Smart, Mapelastic Turbo. Improves punch resistance, elongation and crack-bridging.

Non-woven, macro-holed polypropylene fabric for reinforcing Mapei waterproof…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

TRIBLOCK P

Three component epoxy-cement based special primer. Can be used on absorbent and non-absorbent substrates. Can be used on damp substrates and those with high residual moisture. Apply two coats and…

Three component epoxy-cement based special primer. Can be used on absorbent and…