Project 48 Restaurant & Bar, Kecskemét

48 Restaurant & Bar

Kecskemét, Hungary

Ref #: 462021

Category: COMMERCIAL FACILITIES

Construction


Yard	Installation of ceramic tiles
Location	Kecskemét, Hungary
Subcategory	RESTAURANT
Application	Installation of ceramic tiles
Start and finish date	2014/2015
Application Type	Floor/wall coverings
Contractor company	Kecskemét Generál
Installer companies	Otti-Manufactura LLC
MAPEI Distributor	Otti-Manufactura Kft.
Credits	Mário Bere
MAPEI Coordination	Mihály Juhász

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR GG

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide.

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready for…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

MAPECRETE STAIN PROTECTION

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution. TECHNICAL DATA: Application temperature…

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…

MAPELASTIC FOUNDATION

Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…

Two-component flexible cementitious mortar for waterproofing concrete and…

MAPELUX LUCIDA

A high-strength, shiny metallic wax for use with the Mapefloor system, to protect floors subject to intense use. Mapelux Lucida is also used with Ultratop floors to facilitate easier maintenance of…

A high-strength, shiny metallic wax for use with the Mapefloor system, to…

MAPELUX OPACA

A high-strength, matt metallic wax used for use with the Mapefloor system, to protect floors subject to particularly intense use. Mapelux Opaca is also used with Ultratop floors to facilitate easier…

A high-strength, matt metallic wax used for use with the Mapefloor system, to…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

TOPCEM

Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be…

Special fast drying hydraulic binder for producing bonded, unbonded or floating…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…