TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with 26-27 parts of water. Pot life of mix: 20-30 minutes (at +20°C). Minimum applicable thickness: 1…
TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts…
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…
Polymer modified cement based textured render finish supplied pre mixed in powder form, to be mixed with water. Where to use: External and Internal, ceilings and walls. Render only ETICS. Suitable…
Polymer modified cement based textured render finish supplied pre mixed in…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…
Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It is easy to apply with a spatula or by brush and gives off very little odour. Pulicol 2000 has high detachment capacity on…
Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion…
High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…
High-protection, thick-layered acrylic coating product with high filling…
Keep in touch
