Solvent free adhesive for prefinished water resistant floating wooden or laminated flooring. Where to use: Bonding of: • joints between pieces of prefinished wooden flooring; • small wooden pieces; •…
Solvent free adhesive for prefinished water resistant floating wooden or…
Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…
Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…
Very fast hardening, two-component, polyester resin for sealing cracks in screeds. By adding dry sand it can be used to manufacture mortars for small repairs. Hardens in approximately 20 minutes.…
Very fast hardening, two-component, polyester resin for sealing cracks in…
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…
Two-component, solvent-free, one or two coat pure epoxy resin, used as a moisture barrier on cementbased substrates with residual or static moisture. A low viscosity product with a high penetration…
Two-component, solvent-free, one or two coat pure epoxy resin, used as a…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…
Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…
Synthetic rubber latex admixture to improve mechanical strength of cementitious…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…
Keep in touch
