High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material. N.B. May also be used for smoothing internal and external surfaces. TECHNICAL DATA:…
Very fast hardening, two-component, polyester resin for sealing cracks in screeds. By adding dry sand it can be used to manufacture mortars for small repairs. Hardens in approximately 20 minutes.…
Very fast hardening, two-component, polyester resin for sealing cracks in…
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…
Two-part, fast-setting, cement based levelling compound suitable for use over the most existing adhesive residues (including bitumen) and onto plywood substrates. Resilient floor coverings can be…
Two-part, fast-setting, cement based levelling compound suitable for use over…
Trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling or smoothing differences in thickness of 1-10 mm to receive all types of floor…
Trade levelling and smoothing compound, protein-free with low odour and high…
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing compound. It is suitable for smoothing new and existing substrates prior to the installation of floor coverings. Latexplan…
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing…
Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. Where to use: Preparation of bonded, unbonded and floating screeds on existing and new slabs for the…
Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic…
Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs…
Pre-blended, ready to use, fast-setting and drying hydraulic binder for…
Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…
Synthetic rubber latex admixture to improve mechanical strength of cementitious…
Planiprep Fix is an ultra-fast drying, fine-grained, thixotropic, cementitious skimcoat compound for the repair and levelling of interior substrates, including, floors and steps. Planiprep Fix can be…
Planiprep Fix is an ultra-fast drying, fine-grained, thixotropic, cementitious…
Keep in touch
