Two component low viscosity epoxy resin for injection. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and structural strengthening of concrete and masonry…
Two component low viscosity epoxy resin for injection. Epojet LV is used to…
Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…
Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…
Very fast hardening, two-component, polyester resin for sealing cracks in screeds. By adding dry sand it can be used to manufacture mortars for small repairs. Hardens in approximately 20 minutes.…
Very fast hardening, two-component, polyester resin for sealing cracks in…
TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP 10); 20x15 mm (IDROSTOP 15); 20x25 mm (IDROSTOP 25). Storage: 12 months. Application temperature range using IDROSTOP…
TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP…
Idrostop B25 N is a water-stop material, composed of a mix of sodium bentonite & butyl rubber which reacts with water to seal construction joints within concrete. The seal resists hydro-static…
Idrostop B25 N is a water-stop material, composed of a mix of sodium bentonite…
Single-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic…
Single-component adhesive for the installation of Idrostop. Idrostop Mastic is…
Hydro-expansive, high-flexibility bentonite jointing profile for waterproofing construction joints and second pours of concrete. TECHNICAL DATA: Shape: pre-formed strip. Size: 25x20 mm. Application:…
Hydro-expansive, high-flexibility bentonite jointing profile for waterproofing…
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…
Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
Keep in touch
