Back

MAPEGROUT SV FIBER

Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing concrete.

Where to use:

Repairing concrete structures where high thicknesses and special shapes of deterioration require the use of a free-flowing mortar, including at low temperatures.

Some application examples:

Repairing concrete floors (industrial, roads, airports).
Repairing hydraulic structures (breather channels, canals and forced run-off channels).
Restoration of floor slabs after removing deteriorated areas by scarifying.
Repairs to joints in motorways.
Rebuilding and levelling off the upper parts of base plinths and reinforced concrete bearing elements on motorway viaducts.
Repairing lower spigots on pre-compressed beams for viaducts.

Packaging: Mapegrout SV Fiber is supplied in 25 kg bags.

TECHNICAL DATA:
Maximum dimension of aggregate: 2.5 mm.
Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water.
Pot life of mix: approximately 20 minutes (at +20°C).
Minimum applicable thickness: 1 cm.
Maximum applicable thickness: 5 cm per layer.
Classification: EN 1504-3 - class R4 structural mortar.
Storage: 12 months.
Application: pouring into formwork.
Consumption: approximately 20 kg/m² per cm of thickness.
Packaging: 25 kg vacuum-packed polyethylene bags.