Two-part polyurethane adhesive for the installation of conductive rubber and PVC flooring.

Where to use:

Bonding of rubber and PVC conductive flooring and relevant copper strips.

Some application examples:

• Adesilex G19 Conductive can be used for bonding:

• Conductive and static-dissipative rubber flooring;

• Conductive and static-dissipative PVC flooring;

• Linoleum

In all areas where the discharge of static electricity could cause explosions or disturb electrical and electronic equipment, e.g. operating rooms, chemical laboratories, and factories, areas containing electronic instruments, data processing centres, etc.

Recommendations:

• Do not use on substrates subject to rising damp (always insert a vapour barrier between the ground and the underlying screed).

• Do not use on damp concrete.

• Do not use on fresh asphalt (wait at least 20 days).

• Do not use on bituminous surfaces that may bleed oils.

• Do not use at temperatures below +10°C or above +30°C.

• Do not use on curved surfaces or on steps if the covering does not maintain perfect contact with the substrate until the setting has occurred.

Packaging: 10 kg buckets.