Micrometric filler material in polyamide used to create surfaces with a non-slip finish. TECHNICAL DATA: Consistency: powder. Colour: white. Storage: 24 months. Packaging: 2 kg.
Micrometric filler material in polyamide used to create surfaces with a…
Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for industrial…
Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete…
One-component polymer-based adhesive for installing engineered wooden boards with beads of adhesive, wooden stairs and wooden baseboards. • Solvent free • Thixotropic to reduce slipping • For wooden…
One-component polymer-based adhesive for installing engineered wooden boards…
A solvent-free, non flammable vinyl/PVC adhesive dispersed in water, with strong initial bond and long open time. Use for bonding PVC / vinyl, homogenous and heterogenous sheet or tile, semi-flexible…
A solvent-free, non flammable vinyl/PVC adhesive dispersed in water, with…
Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC and rubber floorings and wall coverings on absorbent substrates. Also suitable as universal adhesive for all common…
Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC…
Dynamon SW is a chemical admixture based on modified acrylic polymer that allows to extend the workability of concrete without without affecting the development of its mechanical strength.
Dynamon SW is a chemical admixture based on modified acrylic polymer that…
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing compound. It is suitable for smoothing new and existing substrates prior to the installation of floor coverings. Latexplan…
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing…
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete. Mapeshield E 25 comprises a 99.9% pure…
Adhesive zinc plates applied directly on the surface of structures for galvanic…
Quick-setting, shrinkage-controlled, thixotropic mortar for repairing concrete, fixing drains, manholes and urban fixtures. Mapegrout SV T is used for repairing highly deteriorated in-situ concrete…
Quick-setting, shrinkage-controlled, thixotropic mortar for repairing concrete,…
Solvent-free, pressure sensitive, multi purpose adhesive, dispersed in water, with permanent tack and very low emissions of VOC. Used for both permanent and release bonding of a wide range of floor…
Solvent-free, pressure sensitive, multi purpose adhesive, dispersed in water,…
Two-component epoxy coating in water dispersion with a gloss finish to form smooth films of resin coating. Specifically developed for coating the surface of walls and ceilings in clean rooms.…
Two-component epoxy coating in water dispersion with a gloss finish to form…
Two-component solvent-free epoxy primer for damp substrates. TECHNICAL DATA: Consistency: liquid. Colour: light brown. Mixing ratio A/B (by weight): 45:55. Pot life of the mix: 35 minutes at +23°C.…
Two-component solvent-free epoxy primer for damp substrates. TECHNICAL DATA:…
Integral waterproofer for cementitious mortars. Use Idrosilex to obtain waterproof renders and screeds. Idrosilex is especially recommended for waterproofing basements, swimming-pools, reservoirs,…
Integral waterproofer for cementitious mortars. Use Idrosilex to obtain…
Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc. Due to its…
Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing…
One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
One-component trowellable fine-textured cementitious paste applied in layers up…
Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.
Two-component rapid-drying elastic cementitious mortar for waterproofing…
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…
Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy based…
Pultrused carbon fibre plates pre-impregnated in epoxy based resin, protected…
Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband TPE, PVC braces, Hypalon and for structural bonding. Adesilex PG4 is a two-component adhesive made up…
Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…
