Colourless primer for non-absorbent substrates to be used before laying PURTOP EASY T. TECHNICAL DATA: Consistency: thick liquid. Colour: transparent. Touch dry: 10 minutes at +23°C. Consumption:…
Colourless primer for non-absorbent substrates to be used before laying PURTOP…
One-component transparent aliphatic polyurethane waterproofing membrane for terraces and balconies. TECHNICAL DATA: Consistency: liquid. Waiting time between each coat: 8-24 hours at +23°C. Colour:…
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
One-component trowellable coarse-textured cementitious paste applied in layers…
Mapeproof AL 1200 AP is made from HDPE membrane coated with a layer of tough adhesive that forms a
monolithic bond with concrete substrates and holds it permanently in place over the years.…
Mapeproof AL 1200 AP is made from HDPE membrane coated with a layer of tough…
High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material. N.B. May also be used for smoothing internal and external surfaces. TECHNICAL DATA:…
Two-component, solvent-free, one or two coat pure epoxy resin, used as a moisture barrier on cementbased substrates with residual or static moisture. A low viscosity product with a high penetration…
Two-component, solvent-free, one or two coat pure epoxy resin, used as a…
Ready mixed paste adhesive for internal wall tiling with most ceramic tiles and mosaics. Non-slip with high initial grab and extended open time. Suitable for domestic kitchens, bathrooms and showers.…
Ready mixed paste adhesive for internal wall tiling with most ceramic tiles and…
Set-retarding admixture for rapid-setting cementitious mortar. TECHNICAL DATA: Consistency: liquid. Storage: 12 months. Consumption: one 0.25 kg bottle per 25 kg bag of PLANITOP SMOOTH & REPAIR or…
Set-retarding admixture for rapid-setting cementitious mortar. TECHNICAL DATA:…
Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make “reinforced” structural render on concrete and masonry structures. TECHNICAL DATA: Type of fibre: A.R. type glass fibre.…
Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make…
Highly breathable silicate primer compliant with DIN 18363 standards. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.1. Dry solids content…
Highly breathable silicate primer compliant with DIN 18363 standards. TECHNICAL…
Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…
Transparent, silane and siloxane water-repellent impregnator in watery…
