Mapei tile system joins spec at Tower Hamlets new Town Hall

June 24, 2024

An extensive tiling project has been completed at Tower Hamlets new Town Hall using a Mapei installation system.  The project, which included the reception area, washrooms and ‘porte-cochere’ entrance was completed by Stone & Ceramic for Bouygues. Tiles specified included natural stone, brick-slips, porcelain and ceramics.

Located within the former Royal London Hospital building in Whitechapel – which had been vacant since 2013 - the new Town Hall project brings the historic Grade II listed landmark building back into the community.  Working closely with Tower Hamlets Conservation Officers, Bouygues preserved the integrity of the building and restored many historic features. Inside, the town hall now provides over 1,500 workspaces, meeting rooms and welfare facilities, whilst the entire ground floor is dedicated to public use. The new design was created by Allford Hall Monaghan Morris.

The tile installation, by Stone & Ceramic, included 1200x600mm terrazzo tiles, Brick Slips, Portland Stone, 1200x600mm porcelain tiles and 150x150mm ceramic tiles.   To prepare surfaces, two Mapei products were specified: Mapei’s Nivoplan smoothing mortar and fibre-reinforced Ultraplan Renovation Screed 3240 levelling compound.  Tiles were installed using three Mapei cementitious adhesives, which each feature a very low VOC formulation; they included Keraquick S1 quick-setting, deformable adhesive, Keraflex high performance adhesive and Keraflex Maxi S1 – a deformable cementitious adhesive with an extended open time.

Two Mapei grouts were used to install the tiles:  Kerapoxy Easy Design, a very low VOC epoxy formulation with improved workability and Zero range Ultracolor Plus grout - Mapei’s anti-efflorescence, quick-setting and drying polymer-modified grout, featuring water-repellent DropEffect® and mould-resistant BioBlock® and with CO2 emissions entirely offset in the entire life cycle*.   Mapesil AC highly elastic and mould-resistant acetic silicone sealant was also applied, to create strong seals throughout the washrooms.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter 

ceramic tiling tiling product Ceramic products for ceramic smoothing and levelling cementitious adhesive Epoxy grout silicone sealant

Products mentioned in the article

NIVOPLAN
NIVOPLAN
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20…
KERAQUICK S1
KERAQUICK S1
High-performance, quick-setting, deformable cementitious adhesive with no vertical slip for ceramic tiles and stone material stable in the…
KERAFLEX MAXI S1
KERAFLEX MAXI S1
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on…
KERAPOXY EASY DESIGN
KERAPOXY EASY DESIGN
Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and…
ULTRACOLOR PLUS
ULTRACOLOR PLUS
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of…
MAPESIL AC
MAPESIL AC
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Keep in touch

Subscribe to our newsletter to get Mapei news