MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei and EPR Contracts improve racegoer’s experience at York Racecourse

March 11, 2025

Mapei products have been used to carry out repair and refurbishment works at York Racecourse’s Bustardthorpe Stand as part of a multimillion-pound investment at the racecourse.  The project, completed by national specialist concrete repair and waterproofing contractors, EPR Contracts, included renovation of concrete terrace steps, underlying concrete frame of the stand and waterproofing of surfaces using Mapei primer, membrane and coloured coating.  All products were supplied by EPMS.

York Racecourse, one of the UK’s premier flat racing venues, attracts 350,000 visitors annually and hosts world class racing, like the Ebor Festival. In 2024, its Juddmonte International was named the Longines World’s Best Horserace. The Bustardthorpe Development enhanced racegoer facilities with new lawns, enhanced bars and food outlets, and sustainable features like solar panels and rainwater harvesting. The project has won industry awards, including the Racing Foundation Green Award for environmental excellence. York was also crowned 2024 Showcase Champion Racecourse at the RCA Showcase Awards. Gavin Pattison, Head of Facilities, said, ‘’The Bustardthorpe Development sets a new standard for racecourse sustainability while enhancing the visitor experience.’’ Officially opened by Queen Camilla, it reinforces York’s commitment to innovation.

Following the repair of the terrace steps and concrete frame - which included repair of all defective concrete to the frame and upper terrace steps, along with the application of smoothing treads and risers - Mapei Purtop Primer FT, an ultra-rapid waterproof primer, was applied to the concrete surface.  Purtop 1000 N – a solvent-free pure polyurea membrane – was then spray-applied using a high-pressure, bi-mixer type pump, to form a waterproof coating across the concourse. The surface was then protected with Mapecoat TNS Fast.  A rapid film-forming, water-based coloured coating, Mapecoat TNS Fast is designed to protect and colour concrete surfaces in areas subjected to a high level of traffic.  Two coats of the acrylic resin-based coating were applied, with surfaces foot traffic ready within an 8-12-hour window. 

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Products for waterproofing polyurethane waterproofing waterproof membrane Waterproofing membrane primer

Products mentioned in the article

PRIMER FT
PRIMER FT
Two-component ultra-rapid primer for Purtop waterproofing systems
PURTOP 1000 N
PURTOP 1000 N
Two-component, solvent-free pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings…
MAPECOAT TNS FAST
MAPECOAT TNS FAST
Where to use: ▪ Protecting and colouring the surface of concrete in areas subject to a high level of footfall, such as spectator stands in…

Keep in touch

Subscribe to our newsletter to get Mapei news