MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

J H Lidstone completes The Park tiling project with Mapei eco-system

March 4, 2025

J H Lidstone has completed a major tile installation using a sustainable Mapei system at The Park – Plymouth City Council’s new state-of-the-art crematorium facility in Saltram, Plymouth. Spanning a floor area of over 1500m2 - and including walls and floors - the installation encompassed three ceremony spaces, WC’s and the Drake Memorial Park café/function room and kitchen.  The project was completed for Kier Construction and featured Mapei preparation and fixing products from the Zero Line - with CO2 offset in the entire lifecycle* - and very low VOC EMICODE: EC1 Plus formulations for a safe application.

Designed by Stride Treglown Architects, The Park has a minimalistic, landscape-inspired design created to promote a sense of calmness. The low-rise building sits beside a large, organically-planted pond within a woodland edge.  Inside, timber features add warmth and draw the eye.  Domus designs in a palette of natural shades were chosen to complement the centre’s aesthetic and its exterior, which is clad with Plymouth Limestone.  The tile installation included flooring within three ceremony spaces, along with fluted dado wall tiles up to a height of 5m.  Floor and wall tiles were also installed within three WC’s, as well as the café and catering areas.

Mapei Topcem - a special fast drying hydraulic screed binder – was added to form the screed where early overlay of finishes was required and Mapefibre NS12 mono-filament, virgin polypropylene fibres were used within the screed to enhance resistance to cracking.

To prepare and smooth surfaces before tiling, J H Lidstone used Mapei Ultraplan Renovation Screed 3240 – a fibre-reinforced smoothing compound - throughout the project. Mapeguard UM 35 uncoupling and anti-fracture membrane was also installed in areas where waterproofing, additional strength and vapour control were required.

Tiles were installed using two Mapei cementitious adhesives: standard-setting Keraflex Maxi S1 and quick-setting Keraquick S1 Zero adhesive, with the addition of Latex Plus elasticizing latex. Tiles were then grouted with anti-efflorescence, quick-setting Ultracolor Plus grout from the Zero line. Both adhesives and grout, along with Ultraplan Renovation Screed 3240, Topcem and Mapeguard UM 35 benefit from very low VOC EMICODE: EC1 Plus formulations, promoting a safe application.

The tile specification included Domus wall and floor tiles and skirting tiles, with designs including Earth Natural Grip, Metro Lounge 2.0 Matt, Wow Stripes, Piemme Glitch, Bera & Beren, Biscuit Matt and Match-Up.

The installation also featured Genesis 8mm Straight Edge Tile Edging in Brushed Silver and 12mm Optimax Heavy Duty Movement Joints.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

tile installation wall tile installation Screeds, levelling and smoothing compounds cementitious adhesive Adhesives grouts

Products mentioned in the article

TOPCEM
TOPCEM
Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For…
MAPEFIBRE NS12
MAPEFIBRE NS12
Mono-filament, virgin polypropylene fibres with a length of 12mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for…
KERAFLEX MAXI S1
KERAFLEX MAXI S1
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on…
KERAQUICK S1 ZERO
KERAQUICK S1 ZERO
High-performance, quick-setting, deformable cementitious adhesive with no vertical slip for ceramic tiles and stone material stable in the…
LATEX PLUS
LATEX PLUS
TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours.…
ULTRACOLOR PLUS
ULTRACOLOR PLUS
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of…
MAPEGUARD UM 35
MAPEGUARD UM 35
TECHNICAL DATA: Length: 30 m. Width: 1 m. Application: see technical Data Sheet. Packaging: 30 m rolls.

Keep in touch

Subscribe to our newsletter to get Mapei news