MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei system chosen for net zero carbon in operation school rebuild project

December 23, 2024
Mapei systems have been specified at a Merseyside school as part of a rebuilding project to create net zero carbon in operation facilities.  The project, at Deyes High School in Maghull, was delivered by Kier and saw the school campus replaced with a brand new 10,000m2 building. Mapei floor preparation and installation systems – each featuring EMICODE: EC1 Plus formulations, with very low VOC formulations - were used to install over 4000m2 of Tarkett vinyl sheet and carpet tiles throughout the building. The installation was completed by Horizon Floors.

The project, funded from the Department for Education’s School Rebuilding Programme, included replacement of all structures on the 13-acre site, apart from the school’s 300-student sixth form. The new school campus spans three floors, with facilities including high-tech classrooms, specialist science labs and resource centre, art studio, multi-use games area, playing fields and sports pitches, and dance, drama and fitness studios.  The new structure will be net zero carbon in operation and features a green roof, solar panels, treble glazed windows and air source heating pumps.  The large green site also includes a wildlife garden, nature trail and a habitat area to support learning and wellbeing. 

During the flooring installation, Mapei Latexplan Trade - a protein-free, low odour levelling and smoothing compound with high compressive strength – was used to level and smooth subfloors. Surfaces were then prepared with Mapeproof Primer - a one-component, rapid drying ready-to-use waterproof surface membrane and flooring was installed with Ultrabond Eco VS90 Plus high temperature universal adhesive.  


If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Floor preparation Flooring installation levelling smoothing compound subfloor

Products mentioned in the article

LATEXPLAN TRADE
LATEXPLAN TRADE
Trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling or smoothing differences…
MAPEPROOF PRIMER
MAPEPROOF PRIMER
One-component, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 CM-% (95% R.H.)
ULTRABOND ECO VS90 PLUS
ULTRABOND ECO VS90 PLUS
Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC and rubber floorings and wall coverings on absorbent…

Keep in touch

Subscribe to our newsletter to get Mapei news