MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Floor install at Royal Gwent Hospital Endoscopy Unit completed with Mapei

January 2, 2025
Levelling products and adhesives from Mapei have been used to complete a resilient floor installation at Royal Gwent Hospital’s new Endoscopy Unit.  The installation, by M2 Flooring Solutions, spanned 3,000 sq m and featured Polyflor sheet vinyl.  The new purpose-built facility was designed by architects from BDP and delivered by contractor, Lancer Scott.

Located within a former birthing unit, the new Endoscopy Unit will provide an expanded range of services to patients in the Gwent area using state-of-the-art equipment and facilities.  The unit includes four operating theatres, a range of treatment rooms, a spacious recovery area and a dedicated space for relatives.  Open seven days a week, it will significantly improve quality, safety and patient experience by doubling its capacity. 

Two Mapei smoothing compounds were used to prepare subfloors throughout the unit.  They included two-part rapid setting and drying Latexplan Trade Fast and fibre-reinforced smoothing compound, Ultraplan Renovation Screed 3240, which has an EMICODE: EC1 Plus formulation, with very low VOCs

The Polyflor sheet vinyl was installed with two solvent-free adhesives:  Ultrabond Eco 380 – a non- flammable pressure sensitive adhesive with strong and fast initial tack and long open time and Ultrabond Eco VS90 Plus - a high temperature universal adhesive, also featuring an EMICODE: EC1 Plus (very low VOC) formulation.


If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Resilient Flooring installation Smoothing compound Adhesives

Products mentioned in the article

LATEXPLAN TRADE FAST
LATEXPLAN TRADE FAST
Latexplan Trade Fast is a two-part rapid setting, fast drying smoothing compound. It is suitable for smoothing new and existing substrates…
ULTRABOND ECO 380
ULTRABOND ECO 380
A solvent-free, non flammable vinyl/PVC adhesive dispersed in water, with strong initial bond and long open time. Use for bonding PVC /…
ULTRABOND ECO VS90 PLUS
ULTRABOND ECO VS90 PLUS
Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC and rubber floorings and wall coverings on absorbent…

Keep in touch

Subscribe to our newsletter to get Mapei news