PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.

MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.

MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.

Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

Brochures, manuals, guides

Brochures

MapePave Leaflet

Mapepave Brush in Grout Leaflet

Request a FREE sample

Sample

Request

Literature

Request

Please select your choices:

We would like to send you email communications containing important news and information regarding our events and product offers. Please tick here to unsubscribe from this activity

I have read and agree to Mapei's Privacy Policy

News & Events

Mapei delivers surface solution at The Cocoa Works

Back

December 20, 2024

A Mapei resilient flooring system has been used to complete an extensive project at The Cocoa Works in York. Installed by Titan Flooring, the project spanned apartment living rooms, bedrooms and corridors throughout the luxury redevelopment, on the site of the former iconic Rowntree Factory. The project was completed by Henry Boot Construction for Latimer – the development arm of Clarion Housing Group.

Originally dating back to the 1890s, the Rowntree Factory is located on an eight-hectare site of historical significance. Derelict for over a decade, the building has been sensitively restored, with the new characterful-contemporary design embracing original features throughout. Designed by Weedon Architects, the building includes 279 luxury one, two and three-bed apartments surrounded by landscaped gardens and external spaces.

Floor preparation works were completed throughout the historic site using two Mapei products. They included ECO Prim T Plus universal acrylic primer and Ultraplan Renovation Screed 3240 – a fibre-reinforced smoothing compound. Both the primer and screed feature very low VOC EMICODE: EC1 Plus formulations.

The floor installation - which included Karndean Designflooring Knight Tile LVT, Interface Contemplation carpet tiles and The Unnatural Flooring Co carpet and underlay - was completed with three Mapei adhesives. Ultrabond ECO TX3 wet-grab adhesive was used to install bedroom carpets and Ultrabond ECO Tack TX+ acrylic-adhesive carpet tile tackifier was used to install carpet tiles throughout corridors. The third adhesive, Ultrabond ECO VS90 Plus wet-bed dispersion

adhesive, was used to install LVT throughout living areas. All three adhesives also feature very low VOC EMICODE: EC1 Plus formulations.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up - https://www.mapei.com/gb/en/newsletter

Resilient Flooring Adhesives Smoothing compound Primers