MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Luxe surface install completed with Mapei at St Moritz Hotel & Cowshed Spa

December 16, 2024
A Mapei tile installation system has been used by J H Lidstone to complete an extensive project at the iconic St Moritz Hotel & Cowshed Spa in Cornwall.  The installation, which featured a variety of N&C Nicobond mosaics and tiles, spanned the indoor pool area, hydro pool, sauna and steam room, experience showers and changing rooms. The Mapei specification included a waterproofing, preparation and installation system, featuring products from Mapei Zero Line - with CO2 offset in the entire lifecycle* - and EMICODE: EC1 Plus formulations. The project was completed for Luscombe Construction and the interior designed by 3idog.

Located in an enviable position on Cornwall’s north coast, near Rock and Polzeath, the St Moritz Hotel is an iconic landmark with a whitewashed tiered façade.  Dating back to the 1930’s, the historic building combines rustic-luxe hotel rooms, large suites, coastal villas and apartments, along with the only Cowshed Spa outside of Soho House properties. The recent £2+ million investment by the hotel’s founder, Hugh Ridgway, has included a rebuild of the indoor swimming pool and the new wellness area, alongside ice fountains and sensory showers.

During preparation of the swimming pool, wellness areas, showers and changing rooms, Mapei Planitop Fast 330 quick-setting, fibre-reinforced cementitious levelling mortar was applied to surfaces, incorporating Topcem special fast drying hydraulic screed binder. Surfaces were then tanked with Mapelastic Zero flexible cementitious waterproofing mortar and Mapeband 120mm – an alkali-resistant rubber and felt tape for corners and adjacent walls – to create an impermeable waterproof barrier.

The tile installation was completed with three Mapei adhesives: Keraflex Maxi S1 deformable standard setting cementitious adhesive, Keraquick XL Fibrelite fibre reinforced cement based rapid setting adhesive and Keraquick S1 Zero* quick-setting adhesive. Tiles were then grouted with Ultracolor Plus anti-efflorescence, quick-setting and drying polymer-modified grout, also from the Zero Line*, and within the pools and showers with Kerapoxy Easy design – a decorative, acid-resistant epoxy grout.  The grouts, adhesives and Planitop also feature EMICODE: EC1 Plus formulations, with very low VOC’s. 

The N&C Nicobond tile specification included a range of mosaics - including Bali Stone, Textura Copper, Snow & Ice St Moritz and Seychelles Silver Grey mosaics - Del Conca floor tiles, Synchro Grey and Obi tiles, Conca Preformed 100mm skirtings and pool edge tiles.


If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

tiling mosaics Waterproofing cementitious leveling Adhesives Tile Grout

Products mentioned in the article

MAPELASTIC ZERO
MAPELASTIC ZERO
Two-component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms and swimming pools with CO 2…
KERAFLEX MAXI S1
KERAFLEX MAXI S1
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on…
KERAQUICK XL FIBRELITE
KERAQUICK XL FIBRELITE
Where to use: Interior and exterior bonding of ceramic and porcelain tiles and mosaics and natural stone materials that are not sensitive…
KERAQUICK S1 ZERO
KERAQUICK S1 ZERO
High-performance, quick-setting, deformable cementitious adhesive with no vertical slip for ceramic tiles and stone material stable in the…
ULTRACOLOR PLUS
ULTRACOLOR PLUS
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of…
KERAPOXY EASY DESIGN
KERAPOXY EASY DESIGN
Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and…

Keep in touch

Subscribe to our newsletter to get Mapei news