MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

S&D Flooring completes Hull Trinity House Academy makeover with Mapei

November 25, 2024
Mapei floor preparation and installation products have been used to complete a project at the new Hull Trinity House Academy.  The installation was carried out by 
S&D Flooring as part of a renovation of the school’s main building and extended dining hall. Works were completed for main contractor, Sewell Construction, and the project was delivered by Hull Esteem Consortium LEP Ltd.

Hull Trinity House Academy is located on the former site of Endeavour School.  The fully refurbished school, run by the Delta Academy Trust, is now co-educational and its Year 7 intake has doubled.

During floor preparation works throughout the school, subfloors were primed with ECO Prim T Plus universal acrylic primer featuring a very low VOC EMICODE : EC1 Plus formulation.  Mapeproof One Coat damp proof membrane was applied to control residual moisture and surfaces were smoothed and levelled with Latexplan No Ammonia fast-setting, cement-based levelling compound and Ultraplan Renovation Screed 3240 fibre-reinforced smoothing compound, also featuring an EMICODE: EC1 Plus formulation.

The flooring installation included Polyflor XL PU, Polysafe Hydro and Tarkett Safetred Spectrum safety vinyl throughout corridors and Burmatex® tivoli® carpet tiles within classrooms.  Two Mapei EMICODE: EC1 Plus adhesives were used to install the flooring: Ultrabond Eco V4 Evolution – an all-in-one universal adhesive – for the vinyl and Mapei Ultrabond Ultrabond Eco Tack TX+ solvent-free acrylic-adhesive carpet tile tackifier.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Floor preparation subfloor Primers levelling compounds Smoothing compound Adhesives

Products mentioned in the article

ECO PRIM T PLUS
ECO PRIM T PLUS
Universal acrylic primer for all absorbent and non-absorbent substrates
MAPEPROOF ONE COAT
MAPEPROOF ONE COAT
The product is easy to use and dries within 6 hours in the following temperatures: +10°c 5-6 hours +23°c 3-4 hours +30°c 2-3 hours
LATEXPLAN NO AMMONIA
LATEXPLAN NO AMMONIA
Two-part, fast-setting, cement based levelling compound suitable for use over the most existing adhesive residues (including bitumen) and…
ULTRABOND ECO V4 EVOLUTION
ULTRABOND ECO V4 EVOLUTION
“All in one” universal adhesive with strong, rapid initial tack and long open time for resilient and textile floor and wall-coverings.
ULTRABOND ECO TACK TX+
ULTRABOND ECO TACK TX+
Carpet tile tackifierA solvent-free non-staining acrylic-adhesive in water dispersion Where to use: A solvent-free, non-staining…

Keep in touch

Subscribe to our newsletter to get Mapei news