PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.

MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.

MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.

Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

Brochures, manuals, guides

Brochures

MapePave Leaflet

Mapepave Brush in Grout Leaflet

Request a FREE sample

Sample

Request

Literature

Request

Please select your choices:

We would like to send you email communications containing important news and information regarding our events and product offers. Please tick here to unsubscribe from this activity

I have read and agree to Mapei's Privacy Policy

News & Events

Mapei system used to complete floor installation at The Junction new build

Back

October 28, 2024

Active Flooring has completed an extensive floor installation, using a Mapei system, at The Junction in Monkbridge, Leeds. The £106m scheme in the city centre includes 665 new homes, retail and hospitality businesses. The installation of Forbo LVT and carpet tiles spanned communal corridors, apartment living spaces and bathrooms. The development was delivered by Galliford Try for City Developments Ltd.

Credited as one of the most significant build-to-rent developments ever seen in the city of Leeds, the scheme spans five blocks and is located on the site of the former Monkbridge steel works site, close to the city’s main railway station. Alongside the apartments, communal areas include private dining rooms, resident lounges, pocket parks and an outdoor events space. As part of the redevelopment of the brownfield site, 20 arches from the adjacent Grade-II listed Victorian viaduct have also been converted to provide retail and hospitality space.

During the floor preparation phase, three Mapei products were used to prepare subfloors. They included Mapei Latexplan Trade levelling and smoothing compound, Mapeproof One Coat single coat surface damp proof membrane to control residual and constructional moisture and Eco Prim T Plus universal acrylic primer.

The floor specification included Forbo Tessera Inline carpet tiles in communal corridors, Forbo Allura Decibel LVT in living spaces and Forbo Novilon Viva vinyl flooring in bathrooms. Carpet tiles were installed using Ultrabond Eco Tack TX+ - a solvent-free, non-staining acrylic-adhesive carpet tile tackifier in water dispersion. All LVT was installed with Ultrabond Eco V4 Evolution all-in-one universal adhesive and Ultrabond Eco TX3 wet grab adhesive. Mapei’s levelling compound, primer and adhesives each feature an EMICODE: EC1 Plus formulation, with very low VOC’s, promoting a safe application.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up - https://www.mapei.com/gb/en/newsletter

Flooring subfloors LVT Flooring LVT Forbo LVT carpet tiles Vinyl Flooring