PRODUCTS
MapePave

MapePave range

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei Topcem features in upsized Primark Metrocentre

Back
October 15, 2024
Fast-track Mapei Topcem has recently been installed as part of an extensive resilient flooring project at Primark Metrocentre in Gateshead.  The expansion project, throughout the ground floor, included upsizing by over 14,100 sq ft.  The Mapei installation was carried out by DPC Screeding for Knowles & Co, Chartered Building Consultancy & Project Management.

Mapei Topcem was specified by Knowles & Co following a previous successful installation at a large retail store in Newcastle.  The floor installation at Primark included vinyl and LVT tile, and Topcem enabled the resilient flooring to be laid after four days. 

A special fast drying hydraulic binder developed for high traffic areas, Mapei Topcem is used to create bonded, unbonded and floating screeds.  It can be utilised on new and existing concrete – and with piped underfloor heating - and is suitable for ceramic and porcelain tiles, natural stone, vinyl, wood, PVC and carpet installations.  Ceramic and porcelain tiles can be installed 24 hours after application and natural stone after two days. 

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

Resilient resilient and material Flooring flooring products

Products mentioned in the article

TOPCEM
TOPCEM
Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For…

Keep in touch

Subscribe to our newsletter to get Mapei news

SUBSCRIBE
SUBSCRIBE