PRODUCTS
MapePave

MapePave range

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei plays key role in Hebburn Tri-Station’s sustainable structure

Back
September 16, 2024
A Mapei subfloor preparation system has been installed at the new Hebburn Tri-Station in South Tyneside – one of the UK’s first carbon neutral emergency service tri-stations. Home to Tyne and Wear Fire and Rescue Service (TWFRS), Northumbria Police and the North East Ambulance Service, the new two-storey building was delivered by Esh Construction, working in partnership with TWFRS.  The Mapei system, including an EMICODE: EC1 Plus certified primer and levelling compound, was installed throughout the station by F Wilkinson Flooring.

Hebburn Tri-Station is one of 17 community fire stations located across Tyne and Wear in the North East of England. The new carbon neutral station replaces the previous Hebburn Community Fire Station, which served its community for nearly 60 years.  Compromising two buildings, the site includes staff accommodation, offices and bays for emergency vehicles, as well as a training facility to support and enhance the skills of specialist rescue, as well as rope rescue fire fighters.

All walls, floors, the roof and structure of the buildings have been designed to be as energy and thermal efficient as possible, as reflected throughout the specification.  Special features include photovoltaic roof panels, ground source heat pumps, light vehicle charging (EV) points, a wildflower meadow to help increase local biodiversity and a rainwater recycling system.

During the preparation of the building’s power floated concrete subfloors, Mapeproof One Coat damp proof membrane was applied throughout to control residual and constructional moisture.  Eco Prim T Plus universal acrylic primer was then applied and the subfloors were levelled with Latexplan Trade – a protein-free, low odour levelling and smoothing compound with high compressive strength.  Both the primer and levelling compound feature very low VOC EMICODE: EC1 Plus formulations, promoting a safe application and environment.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter

subfloor preparation Sub-floor cementitious sub floors resilient coverings textile flooring wooden flooring Flooring

Products mentioned in the article

MAPEPROOF ONE COAT
MAPEPROOF ONE COAT
The product is easy to use and dries within 6 hours in the following temperatures: +10°c 5-6 hours +23°c 3-4 hours +30°c 2-3 hours
ECO PRIM T PLUS
ECO PRIM T PLUS
Universal acrylic primer for all absorbent and non-absorbent substrates
LATEXPLAN TRADE
LATEXPLAN TRADE
Trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling or smoothing differences…

Keep in touch

Subscribe to our newsletter to get Mapei news

SUBSCRIBE
SUBSCRIBE