MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei tile system joins spec at Tower Hamlets new Town Hall

June 24, 2024

An extensive tiling project has been completed at Tower Hamlets new Town Hall using a Mapei installation system.  The project, which included the reception area, washrooms and ‘porte-cochere’ entrance was completed by Stone & Ceramic for Bouygues. Tiles specified included natural stone, brick-slips, porcelain and ceramics.

Located within the former Royal London Hospital building in Whitechapel – which had been vacant since 2013 - the new Town Hall project brings the historic Grade II listed landmark building back into the community.  Working closely with Tower Hamlets Conservation Officers, Bouygues preserved the integrity of the building and restored many historic features. Inside, the town hall now provides over 1,500 workspaces, meeting rooms and welfare facilities, whilst the entire ground floor is dedicated to public use. The new design was created by Allford Hall Monaghan Morris.

The tile installation, by Stone & Ceramic, included 1200x600mm terrazzo tiles, Brick Slips, Portland Stone, 1200x600mm porcelain tiles and 150x150mm ceramic tiles.   To prepare surfaces, two Mapei products were specified: Mapei’s Nivoplan smoothing mortar and fibre-reinforced Ultraplan Renovation Screed 3240 levelling compound.  Tiles were installed using three Mapei cementitious adhesives, which each feature a very low VOC formulation; they included Keraquick S1 quick-setting, deformable adhesive, Keraflex high performance adhesive and Keraflex Maxi S1 – a deformable cementitious adhesive with an extended open time.

Two Mapei grouts were used to install the tiles:  Kerapoxy Easy Design, a very low VOC epoxy formulation with improved workability and Zero range Ultracolor Plus grout - Mapei’s anti-efflorescence, quick-setting and drying polymer-modified grout, featuring water-repellent DropEffect® and mould-resistant BioBlock® and with CO2 emissions entirely offset in the entire life cycle*.   Mapesil AC highly elastic and mould-resistant acetic silicone sealant was also applied, to create strong seals throughout the washrooms.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter 

ceramic tiling tiling product Ceramic products for ceramic smoothing and levelling cementitious adhesive Epoxy grout silicone sealant

Products mentioned in the article

NIVOPLAN
NIVOPLAN
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20…
KERAQUICK S1
KERAQUICK S1
High-performance, quick-setting, deformable cementitious adhesive with no vertical slip for ceramic tiles and stone material stable in the…
KERAFLEX MAXI S1
KERAFLEX MAXI S1
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on…
KERAPOXY EASY DESIGN
KERAPOXY EASY DESIGN
Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and…
ULTRACOLOR PLUS
ULTRACOLOR PLUS
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of…
MAPESIL AC
MAPESIL AC
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Keep in touch

Subscribe to our newsletter to get Mapei news