MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

BDA certification for Mapei concrete waterproofing duo

June 17, 2024

Mapei has received BDA Agrément Certification from Kiwa for its concrete waterproofing products - Mapeproof HW N Bentonite waterproofing membrane and Idrostop B25 N Bentonite water-stop.

Mapeproof HW N is a waterproofing bentonite sheet for vertical and horizontal surfaces within underground structures and Idrostop B25 N is used to seal concrete construction joints in these structures. During the BDA assessment process, it was confirmed that Mapeproof HW N provides continuous and fully bonded protection of Grades 1, 2 and 3 in accordance with BS 8102-2022, whilst both Mapeproof HW N and Idrostop B 25 N can satisfy or contribute to satisfying the relevant requirements in relation to NHBC standard Chapter 5.1 substructure and ground bearing floors and Chapter 5.4 waterproofing of basements and other below ground structures.

Both products can be used either separately or together to provide waterproofing of below ground structures and water retaining structures



If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter 

waterproofing concrete waterproofing membrane

Products mentioned in the article

MAPEPROOF HW N
MAPEPROOF HW N
Mapeproof HW N is an active waterproofing membrane of high-strength geotextiles encapsulating a layer of sodium bentonite. It consists of…
IDROSTOP B25 N
IDROSTOP B25 N
Idrostop B25 N is a water-stop material, composed of a mix of sodium bentonite & butyl rubber which reacts with water to seal construction…

Keep in touch

Subscribe to our newsletter to get Mapei news