MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Mapei UltraCare treatments receive EPD certification

June 10, 2024

Mapei has received Environmental Product Declaration (EPD) certification for a series of treatments from its UltraCare range. They include six tile and stone cleaning products and UltraCare Smooth Silicone.  The certification reflects Mapei’s commitment to whole life cycle sustainability, from raw materials, through manufacturing and packaging, reducing the amount of CO2 associated to the product itself.  Each of the products are also part of Mapei UK’s Zero Line, with CO2 fully offset in the entire life cycle.[1]

Used to document the effects a product has on the environment throughout its entire life cycle, EPD’s are a fundamental tool within the construction sector; they enable the identification of low environmental impact products, to meet project requirements and certification protocols for sustainable building. Mapei calculates the impacts its products have on the environment using the standardised LCA (Life Cycle Assessment) method.  It now has more than 390 EPD certificates across all product ranges - spanning adhesives, admixtures, coatings, floor preparation products, grouts and surface care products.

EPD certified products from the UltraCare range include:

UltraCare Keranet - a concentrated ‘buffered’ acid cleaner; removes rust stains from porcelain and ceramic tiles, as well as limescale and efflorescence.   

UltraCare Kerapoxy Cleaner - a ready-to-use solution for the removal of epoxy residue after grouting.

UltraCare HD Cleaner - an intensive alkaline treatment for deep cleaning and restoration.

UltraCare Acid Cleaner – a concentrated ‘buffered’ acid cleaner.

UltraCare Multicleaner - a concentrated pH-neutral solution for everyday cleaning.

UltraCare Grout Cleaner - a ready-to-use concentrated alkaline cleaner for cementitious and epoxy grouts.

UltraCare Smooth Silicone – a smoothing product for finishing sealants.   

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter 

Ultracare Products for cleaning, maintaining and protecting surfaces

Products mentioned in the article

ULTRACARE KERANET
ULTRACARE KERANET
Acid-based concentrated cleaning product in liquid form to remove cementitious residues from porcelain, ceramic and all acid-resistant…
ULTRACARE KERAPOXY CLEANER
ULTRACARE KERAPOXY CLEANER
Ready to use special cleaning product to remove epoxy residues
ULTRACARE HD CLEANER
ULTRACARE HD CLEANER
Concentrated high performing professional detergent to remove organic dirt and to undertake a deep clean of surfaces. It is also effective…
ULTRACARE ACID CLEANER
ULTRACARE ACID CLEANER
Concentrated acid-based cleaner in liquid form to remove stubborn cementitious grout residues from glass mosaic, ceramic and acid resistant…
ULTRACARE MULTICLEANER
ULTRACARE MULTICLEANER
Concentrated cleaner with a very high yield for everyday cleaning and maintenance of surfaces
ULTRACARE SMOOTH SILICONE
ULTRACARE SMOOTH SILICONE
Smoothing product for finishing sealants during application
ULTRACARE GROUT CLEANER
ULTRACARE GROUT CLEANER
Ready to use concentrated cleaner, specific for both epoxy and cementitious grouts

Keep in touch

Subscribe to our newsletter to get Mapei news