MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Luxury Cowbridge project completed with Mapei resilient system

May 20, 2024

An extensive luxury vinyl tile installation has been completed with a Mapei resilient floor system at Plas Dorlan in Cowbridge.  The stunning three-storey development, by Knox & Wells, includes two and three bedroom apartments with south-facing balconies overlooking the River Thaw.  The project was completed by Kimpton Flooring.

Set in the heart of South Wales’ most desirable market town, Plas Dorlan is a statement building offering generous, well-proportioned dwellings presented in a unique and avant-garde way. In addition to luxurious, high-end interiors, the development features communal riverside and roof gardens with far reaching views.

Mapei floor preparation and installation products, each featuring EMICODE: EC1 Plus (very low VOC) formulations, were used to complete the project.  The specification included Mapeproof Primer – a one-component, rapid drying ready-to-use waterproof surface membrane, Eco Prim Grip Plus – a multi-purpose, ready-to-use, low odour, bonding promoter primer and Ultraplan Renovation Screed 3240 fibre-reinforced smoothing compound. Tiles were installed with Ultrabond Eco 4 LVT fibre-reinforced adhesive – a hard set, wet bed formulation with high shear resistance.

If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter 

Resilient Vinyl Flooring primers smoothing compound vinyl adhesive

Products mentioned in the article

MAPEPROOF PRIMER
MAPEPROOF PRIMER
One-component, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 CM-% (95% R.H.)
ECO PRIM GRIP PLUS
ECO PRIM GRIP PLUS
Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render,…
ULTRABOND ECO 4 LVT
ULTRABOND ECO 4 LVT
Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in…

Keep in touch

Subscribe to our newsletter to get Mapei news