MapePave

PUBLIC SPACES

LANDSCAPING

RESIDENTIAL BUILDINGS

SUITABLE FOR SURFACES USED BY VEHICLES

MapePave Range is intended to make it easier to lay natural and engineered stone pavers all year.

It includes a ready-to-use mortar system (MapePave Mortar and MapePave Slurry) that enables normal setting and regulated shrinkage for fast-drying bedding and installation of 20mm porcelain and natural stone.

MapePave Brush in Grout a single component ready-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5 mm wide.

Products in this line


MapePave Mortar

MapePave Mortar

Pre-blended, ready to use mortar with normal setting and controlled shrinkage for fast-drying bedding. Use in conjunction with MapePave Slurry.
MapePave Mortar is ideal for bedding 20mm porcelain, it is rapid curing (just 12 hours for foot traffic), rapid curing, thin application, with low shrinkage and is compliant with BS 7533. Pre-blended, just mix with water, to be used in conjunction with MapePave Slurry.

WALKABLE AFTER 12 HOURS

Mix ratio

Packaging: 25kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Slurry

MapePave Slurry

Pre-blended, ready to use mortar, mixed with water for a paving slurry ideal for bonding 20mm porcelain. Use in conjunction with MapePave Mortar.
MapePave Slurry is a bonding agent to be used in conjunction with MapePave Mortar  for the rapid installation of exterior paving including 20mm porcelain.

WALKABLE AFTER 12 HOURS

Mix Ratio

Packaging: 20kg bags.
Consumption 15 kg/m² per cm of thickness.
MapePave Brush in Grout

MapePave Brush In Grout

One -component ready to-to-use polybutadiene-based drainage mortar for grouting paved floors with joints at least 5mm wide.
Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes).

JOINTING MORTAR

READY TO USE

LIGHT FOOT TRAFFIC AFTER 24 HOURS

EASY TO APPLY

Packaging: supplied in vacuum-packed 15kg drums.
Consumption depends on the width of the joints and the size of the slabs eg. where 600 x 600 x 20mm slabs are installed with a 5mm joint a 15kg drum of this product will cover approximately 25m .

technical-documentation-wBrochures, manuals, guides

Request a FREE sample 

Sample
Literature
Please select your choices:

News & Events

Active Flooring completes Trinity School install with safety-assured Mapei system

April 8, 2024

Active Flooring has completed an extensive installation, using a Mapei sustainable flooring system, at Colchester’s new Trinity School. Constructed by Bowmer + Kirkland for the Department of Education, the new school will provide 900 student places.  The floor installation within the new three-storey building included a selection of Gerflor’s Vinyl Safety, Homogeneous & ESD Flooring and Burmatex® cordiale carpet tiles throughout classrooms and school office areas.

The new building, designed by  Stride Treglown Architects, features a large atrium at its centre – above a dining room - and a single storey link which provides covered access to a 2.5 storey tall sports block.

During the floor preparation phase, Active Flooring installed Mapeproof Primer – a one-component, rapid drying ready-to-use waterproof surface membrane and then levelled and smoothed subfloors with Latexplan Trade – a protein-free, low odour levelling and smoothing compound with high compressive strength. 

Two adhesives were used to complete the installation: for the vinyl flooring, Ultrabond Eco V4 Evolution all-in-one universal adhesive - a strong, rapid initial tack formulation with a long open time was used and Ultrabond Eco Tack TX+ - an acrylic-adhesive carpet tile tackifier in water dispersion for the carpet tiles. All Mapei products specified benefit from EMICODE: EC1 Plus formulations, with very low VOC’s, promoting a safe application and environment.


If you would like to be kept up to date with all the developments and industry news from Mapei UK.
Click here to sign up -  https://www.mapei.com/gb/en/newsletter 

Flooring flooring adhesive flooring products Vinyl Flooring

Products mentioned in the article

MAPEPROOF PRIMER
MAPEPROOF PRIMER
One-component, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 CM-% (95% R.H.)
ULTRABOND ECO V4 EVOLUTION
ULTRABOND ECO V4 EVOLUTION
“All in one” universal adhesive with strong, rapid initial tack and long open time for resilient and textile floor and wall-coverings.
Ultrabond Eco Tack TX+
Ultrabond Eco Tack TX+
Carpet tile tackifierA solvent-free non-staining acrylic-adhesive in water dispersion Where to use: A solvent-free, non-staining…
LATEXPLAN TRADE
LATEXPLAN TRADE
Trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling or smoothing differences…

Keep in touch

Subscribe to our newsletter to get Mapei news