Project Waste to energy plant, San Vittore del Lazio


Yard	waterproofing
Location	San Vittore del Lazio, Italy
Subcategory	WATER-SOFTENER
Built in	2011
Opened in	2011
Application	Interior waterproofing
Application Type	Waterproofing
Client	E.A.L.L. srl; Gruppo ACEA Spa
Contractor company	L'internazionale Soc. Coop.
Installer companies	TE Srl
Credits	arch. Mario Monardo
Project Manager	ing. Francesco Martino

DURESIL EB

Two-component, anti-acid epoxy paint modified with hydro-carbide resin for protecting concrete and steel surfaces. TECHNICAL DATA: Consistency: component A fluid paste, component B fluid paste.…

Two-component, anti-acid epoxy paint modified with hydro-carbide resin for…

DYNAMON SR3

Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, extremely high mechanical strength and long slump retention Where to use Dynamon SR3 is…

Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…

IDROSTOP B25

Hydro-expanding bentonite jointing material for sealing construction joints. TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to…

Hydro-expanding bentonite jointing material for sealing construction joints.…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray. Consumption: – neat:…

Anti-evaporation agent in water emulsion for protecting the surface of concrete…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods CO2 FULLY OFFSET PRODUCTS Mapefer 1K Zero is part of the CO2 Fully Offset in the Entire Life Cycle line of products. CO2…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods…

MAPEGROUT SV

Ultra high performance, rapid-setting and hardening, compensated-shrinkage, hi-flow cementitious mortar applicable at temperatures down to -5°C for repairing concrete and fixing urban features in…

Ultra high performance, rapid-setting and hardening, compensated-shrinkage,…

MAPELASTIC FOUNDATION

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140…

Bentonite waterproofing sheets for structures below ground level, suitable for…