Project National Arts School, Avana


Yard	Restoration
Location	Avana, Cuba
Subcategory	SCHOOL
Built in	2001
Opened in	2008
Application	Masonry restoration and ceramic installation
Application Type	Installation of floors
Client	Ministerio de Cultura de Cuba
Contractor company	Contingente Nico Lòpes, ENIA, ECOING 5, Carpinterìa Habana del MICONS, Empresa Constructora Puerto Carenas de la Oficina del Historiador
Architects	arch. Ricardo Porro, arch. Vittorio Garatti e arch. Roberto Gottardi
MAPEI Distributor	Arca 99 srl
Credits	Mapei SpA
Project Manager	Ministerio de la Constucciòn de Cuba - MICONS

ADESILEX PG1 ADESILEX PG2

Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick with very low…

Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE…

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

ANTIPLUVIOL W

Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…

Transparent, silane and siloxane water-repellent impregnator in watery…

ELASTOCOLOR PITTURA

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings WHERE TO USE •Monolithic repair of structures with cracks or fissures caused by heavy loads, accidental impacts and earthquakes.…

Two-component, super-fluid epoxy resin for injections and anchorings WHERE TO…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

GRANIRAPID

GRANIRAPID is a two-component, fast-setting and hydrating , deformable , high-performance cementitious adhesive, for ceramic tiles and stone material. Particularly suitable for stone materials…

GRANIRAPID is a two-component, fast-setting and hydrating , deformable ,…

IDROSTOP

Hydrophilic, expanding rubber profiles for waterproof working joints. TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP 10); 20x15 mm (IDROSTOP 15); 20x25 mm (IDROSTOP 25).…

Hydrophilic, expanding rubber profiles for waterproof working joints. TECHNICAL…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

KERACRETE

Synthetic latex mixed with sand and cement to make adhesive to bond ceramic tiles and stone material, and smoothing/skimming mortar. WHERE TO USE Keracrete is a latex to be mixed with sand and…

Synthetic latex mixed with sand and cement to make adhesive to bond ceramic…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPEFER

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…