Project Light House, Praga

Light House

Praga, Czech Republic

Ref #: 3622

Category: COMMERCIAL

Construction


Yard	Floor/wall coverings
Location	Praga, Czech Republic
Subcategory	MALL
Built in	2003
Opened in	2004
Application	Internal installation of ceramic tiles
Application Type	Floor/wall covering
Contractor company	L.H. Vltava Waterfonf Touwe s.r.o.
Installer companies	Bau 24 s.r.o.
Architects	Ing. Arch. Hradecky
MAPEI Distributor	Mapei s.r.o.
Project Manager	ADMS Moches Zur

Product used for the project

KERACOLOR FF

CLASSIFICATION IN COMPLIANCE WITH EN 13888-1：Keracolor FF is an improved (2) cementitious (C) grout (G), with reduced water absorption (W) and high abrasion resistance (A), classified as CG2WA.…

CLASSIFICATION IN COMPLIANCE WITH EN 13888-1：Keracolor FF is an improved (2)…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. WHERE TO USE ·Waterproofing corners between adjacent walls and between walls and floors before…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0…

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: - Additive for cementitious smoothing compounds. Additive for improving the mechanical…

Synthetic rubber latex for improving adhesion and mechanical strength of…

PLANITOP 100

Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render. TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with…

Quick-setting, light-grey coloured fine mortar for repairing and smoothing…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRAPLAN

Ultra-fast hardening self-levelling smoothing compound. Applications: Interior levelling of new and existing substrates to make them suitable for receiving all types of flooring where a high…

Ultra-fast hardening self-levelling smoothing compound. Applications: Interior…