Project Hardangerbadet, Øystese


Yard	Swimming pools
Location	Øystese, Norway
Subcategory	SWIMMING POOL
Built in	2018
Opened in	2019
Application	Delivery of complete solutions for waterproofing, tiling and concrete preparation
Start and finish date	2018/2019
Application Type	Concrete restoration, Floor/wall covering, New building, Waterproofing
Client	Hardangerbadet AS
Contractor company	LAB Entreprenør AS
Installer companies	Smistad Mur og Flis AS
MAPEI Distributor	Modena Gruppen
Credits	Viggo Moen, Mapei AS
MAPEI Coordination	Viggo Moen, Alf Ruud

ADESILEX PG1 ADESILEX PG2

Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick with very low…

Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. WHERE TO USE ·Waterproofing corners between adjacent walls and between walls and floors before…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: - Additive for cementitious smoothing compounds. Additive for improving the mechanical…

Synthetic rubber latex for improving adhesion and mechanical strength of…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…