Project Wellness center BEAUTY&BEAST, Velké Meziříčí

Wellness center BEAUTY&BEAST

Velké Meziříčí, Czech Republic

Ref #: 202006

Category: TOURISM AND WELLNESS

Construction


Yard	Wellness center
Location	Velké Meziříčí, Czech Republic
Subcategory	Spa
Built in	2019
Opened in	2020
Application	Complete construction of a wellness center - swimming pools, showers, steam, sauna, sanitary facilities
Start and finish date	2019/2020
Application Type	Floor/wall covering, Waterproofing
Client	Petra Zak s.r.o.
Installer companies	Building centrum, RCJ
MAPEI Distributor	RCJ
Credits	MG Trade
MAPEI Coordination	Ing. Michal Lukas

Product used for the project

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: - Additive for cementitious smoothing compounds. Additive for improving the mechanical…

Synthetic rubber latex for improving adhesion and mechanical strength of…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…