Project Baseny Mineralne, Solec Zdrój


Yard	spa
Location	Solec Zdrój, Poland
Subcategory	SWIMMING POOL
Built in	2012
Opened in	2012
Application	waterproofing and ceramic installation
Application Type	Waterproofing
Installer companies	Fliz-Kom Mirosław Saczka
Project Manager	Piotr Kuglin, Mariusz Żmudka, Grzegorz Batko, Filip Stefański

ADESILEX P10

High performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic and marble mosaic. WHERE TO USE Interior and exterior floor and wall bonding of: • front…

High performance white cementitious adhesive, with no vertical slip and…

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings WHERE TO USE •Monolithic repair of structures with cracks or fissures caused by heavy loads, accidental impacts and earthquakes.…

Two-component, super-fluid epoxy resin for injections and anchorings WHERE TO…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. WHERE TO USE ·Waterproofing corners between adjacent walls and between walls and floors before…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex for improving adhesion and mechanical strength of cementitious mortars. Where to use: - Additive for cementitious smoothing compounds. Additive for improving the mechanical…

Synthetic rubber latex for improving adhesion and mechanical strength of…

PULICOL 2000

Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel. Colour: transparent. Inflammable: yes. Application temperature range: from +10°C to +35°C. Removal time: – adhesives in…

Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel.…